May 07, 2024  
2019-2020 Undergraduate and Graduate Catalog 
    
2019-2020 Undergraduate and Graduate Catalog [ARCHIVED CATALOG]

Courses


 

Electrical Engineering

  
  • E E 583 - Digital Image Processing


    (3 units)

    Prerequisite:  Open to Engineering MS and Electrical Engineering MS students only.
    Acquiring Images. Correcting Imaging defects. Image enhancement. Segmentation and threshholding. Processing Binary images. Tomography. Three dimensional Imaging. Some image data compression techniques. Masters students register in EE 583; Ph.D. students register in E E 683 . Additional projects required for E E 683 .

    Letter grade only (A-F). (Lecture-problems 3 hours). Double Numbered with: E E 683  
  
  • E E 585 - Advanced Digital Signal Processing


    (3 units)

    Prerequisite:  Open to Engineering MS and Electrical Engineering MS students only.
    Advanced topics in digital signal processing and applications to communication and power line systems, including adaptive filters, FFT-based OFDM transceivers. IEEE standards for green energy communication and optimization. Masters students register in EE 585; Ph.D. students register in E E 685 . Additional projects for E E 685 .

    Letter grade only (A-F). (Lecture-problems 3 hours). Double Numbered with: E E 685  
  
  • E E 586 - Real-Time Digital Signal Processing


    (3 units)

    Prerequisites: Open to Electrical Engineering MS and Engineering MS students only.
    Digital signal processors architecture and language. Real-time DSP considerations and limitations. Digital filter and signal processing system implementations.

    Letter grade only (A-F). (Lecture-problems 3 hours)
  
  • E E 587 - Fiber Optic Networks


    (3 units)

    Prerequisites: Open to Electrical Engineering MS and Engineering MS students only.
    Introduction to optical networks. Operation of optical fiber, semiconductor lasers, photo detectors, and fiber optic components. Modulation and demodulation techniques for fiber optic communication systems. Design of optical transmission systems

    Letter grade only (A-F). (Lecture-problems 3 hours).
  
  • E E 588 - DSP for MMO Communication Systems


    (3 units)

    Prerequisite: E E 508 . Open to Electrical Engineering MS and Engineering MS students only.
    Advanced topics in DSP and Communication systems with applications to space-time coded OFDM transceivers, MIMO wireless systems, LTE/LTE-advanced in physical layer, and next generation for mobile communications.

    Letter grade only (A-F). (Lecture-problems 3 hours)
  
  • E E 589 - Multiuser Communications


    (3 units)

    Prerequisite: E E 508 .  Open to Electrical Engineering MS and Engineering MS students only.
    Advanced multiuser, cooperative and competitive wireless mobile communication systems; spread spectrum systems; infrastructure based, and ad hoc multiuser communication systems.

    Letter grade only (A-F). (Lecture-Problems 3 hours).
  
  • E E 590 - Selected Topics in Electrical Engineering


    (3 units)

    Prerequisites: Graduate standing in electrical engineering and consent of instructor.
    Selected topics from recent advances in electrical engineering.

    Letter grade only (A-F). (Lecture-problems 3 hours) May be repeated to a maximum of 6 units. Topics announced in the Schedule of Classes.
  
  • E E 591 - Adaptive Systems


    (3 units)

    Prerequisite:  Open to Engineering MS and Electrical Engineering MS students only.
    Adaptive systems and their applications to communication, control, and signal processing systems.

    Letter grade only (A-F). (Lecture-problems 3 hours).
  
  • E E 592 - Wireless Communications


    (3 units)

    Prerequisite: E E 508   or consent of instructor. Engineering and Electrical Engineering MS majors only.
    Design of advanced wireless communication systems, optimum receivers, probability of error and outage, diversity, multicarrier modulation, ISI countermeasures.

    Letter grade only (A-F). (Lecture-Problems 3 Hours).
  
  • E E 606 - Theory and Practice of Biomedical Instrumentation


    (3 units)

    Prerequisites: Graduate standing in engineering or natural sciences. Open to Electrical Engineering MS and Engineering MS students only.
    Advanced design concepts and practical utilization of biomedical instrumentation. Transduction of physiological parameters. Theory and practice. Additional projects required for EE 606. Master’s students register in E E 506 ; Ph.D. students register in EE 606.

    Letter grade only (A-F). (Lecture-problems 3 hours). Double Numbered with: E E 506  
  
  • E E 607 - Advanced Biomedical Systems


    (3 units)

    Prerequisites: Graduate standing in engineering or natural sciences. Open to Electrical Engineering MS and Engineering MS students only.
    Novel trends in biotechnology, design and organization of modern hospital systems and utilization of advanced technologies. Modeling simulation of physiological and medical systems. Additional projects required for EE 607. Master’s students register in E E 507 ; Ph.D. students register in EE 607.

    Letter grade only (A-F). (Lecture-problems 3 hours). Double Numbered with: E E 507  
  
  • E E 632 - Analog Signal Processing


    (3 units)

    Prerequisite:  Open to Electrical Engineering MS or Engineering MS students;  or consent of instructor.
    Basic CMOS circuit techniques. Low-voltage and current-mode signal processing. Switched-capacitor (SC)and switched-current (SI) circuits such as amplifiers, integrators, S/H circuits, filters, oscillators, D/A and A/D converters, etc. Advanced techniques for corrections of nonideal behavior. Analysis and simulation projects. Additional projects required for EE 632. Master’s students register in E E 532 ; Ph.D. students register in EE 632.

    Letter grade only (A-F). (Lecture-problems 3 hours). Double Numbered with: E E 532  
  
  • E E 675 - Non-Linear Control Systems


    (3 units)

    Prerequisite: E E 511  with a grade of “C” or better. Open to Electrical Engineering MS and Engineering MS students only.
    Methodologies and results dealing with stability and robust stabilization of non-linear systems applied to robotics, aerospace, artificial neural networks, etc. Phase plane analysis, limit cycles, Lyapunov stability theory and its extension, Positive real transfer matrix and passivity, feedback linearization and stabilization, tracking, robust control. Ph.D. students register in EE 675. Advanced projects for EE 675 students.

    Letter grade only (A-F). (Lecture-problems 3 hours). Not open for credit to students with credit in EE 775. Double Numbered with: E E 575  
  
  • E E 683 - Digital Image Processing


    (3 units)

    Prerequisite: E E 505  with a grade of “C” or better. Open to Electrical Engineering MS and Engineering MS students only.
    Acquiring Images. Correcting Imaging defects. Image enhancement. Segmentation and threshholding. Processing Binary images. Tomography. Three dimensional Imaging. Some image data compression techniques. Additional projects required for EE 683. Masters students register in E E 583 ; Ph.D. students register in EE 683.

    Letter grade only (A-F). (Lecture-problems 3 hours). Double Numbered with: E E 583  
  
  • E E 685 - Advanced Digital Signal Processing


    (3 units)

    Prerequisite: Open to Electrical Engineering MS and Engineering MS students only.
    Advanced topics in digital signal processing and applications to communication and power line systems, including adaptive filters, FFT-based OFDM transceivers. IEEE standards for green energy communication and optimization. Additional projects for EE 685. Masters students register in E E 585 ; Ph.D. students register in EE 685.

    Letter grade only (A-F). (Lecture-problems 3 hours). Double Numbered with: E E 585  
  
  • E E 697 - Directed Research


    (3 units)

    Prerequisite: Open to Engineering MS and Electrical Engineering MS students only.
    Theoretical, experimental, or industrial problems in Electrical Engineering requiring intensive analysis culminating in a substantial report.

    Credit/No Credit grading only. May be repeated to a maximum of 6 units with same topic in different semesters.
  
  • E E 698 - Thesis or Industrial Project


    (3-6 units)

    Prerequisite: Advancement to Candidacy.  Engineering and Electrical Engineering MS majors only.
    Planning, preparation and completion of a thesis (total 6 units), or industrial project (3 units), in electrical engineering.

    Credit/No Credit grading only. May be repeated to a maximum of 6 units with same topic in different semesters.
 

Page: 1 | 2